With the continuous advancement of technology, the production demand of the printing industry, and the increasingly fierce market for paper cutters, the future development of paper cutters will move towards large format and higher intelligence. The editor of this article mainly summarizes the operating standards that need to be paid attention to during the use of the paper cutter:

1. The operator must be familiar with the performance and key points of the paper cutter, and pass the exam before operating the paper cutter. Before each startup, first check whether the photoelectric protection switch of the paper cutter is normal and reliable. Try the empty knife three times first and observe if there is any return of the knife. If any abnormalities are found, do not switch it on or off. It must be repaired by personnel before use.

2. Before starting up, fill all lubrication points of the machine with numbered lubricating oil. Pay attention to the surrounding environment and whether anyone is performing other maintenance work on the machine. Check the operation of the machine, the centralized lubrication system, the emergency stop buttons of various parts, and whether the devices are functioning properly. It is strictly prohibited to place tools or other objects (such as steel rulers, wrench, screwdriver) on the top of the paper cutter.

3. When installing or disassembling the paper cutting blade, manual operation should be used. The switch can only be turned to the tool change switch position after the main motor has completely stopped. It is strictly prohibited to change the tool by tapping. When adjusting the depth of the adhesive strip of the paper cutter, the paper cutter should be raised first, and then the depth of the adhesive strip should be carefully adjusted from shallow to deep. After the blade edge becomes dull, the blade should be replaced immediately and cannot be used again to avoid overloading the machine and causing damage to the components. Do not insert your arm into the knife door after turning on the power of the paper cutter. If a malfunction occurs, stop the machine immediately. If the paper cutter is not fully returned and stopped properly, do not reach out to take out the paper.