During the process of using a slitting machine, it is necessary to regularly add specialized lubricating oil to lubricate the relevant components, which is the same as the operation principle of cars and other machinery and equipment. So, do you know whether oil should be added to the slitting machine shaft?

Each roller and corresponding component inside the slitting machine shaft needs to be oiled three times a week. When the air humidity in the production workshop is below 50%, due to static electricity, the handcart will start flying and break a lot. In the most serious case, it takes more than 2 hours for a handcart worker to complete a factory wire shaft head. After modifying the oiling equipment on the slitting and warping machine for real silk fabrics, we solved the problem of flying caused by static induction. It only takes 45 minutes to apply the same shaft head, which not only alleviates the labor efficiency of employees but also improves efficiency.

The slitting machine needs to add butter in the area of the left and right knives, and add oil three times a week. Lubricating oil needs to be added to the clutch area for cutting. The transmission system shaft of the toothless extruder screw needs to be oiled, and then moved up and down three times a week. The sealing coils in the cylinder of the rechargeable battery slitting machine need to be cleaned and cleaned, and lubrication should be carried out in the area where fish eyes are exposed. Rolling bearings and feeding racks are undergoing refueling work every three days.

Slitting machines are widely used in metal sheet processing industries such as automobiles, agricultural vehicles, containers, household appliances, packaging, and building materials. It is necessary to lubricate the slitting machine shaft, and everyone needs to lubricate according to the requirements.